bookmarkrole Chapter 304
Chapter 304
Chapter 304 Aircraft Research and Development Conference
“However, this kind of scheme has a big disadvantage, that is, if this kind of scheme is used, this transport aircraft will not have a qualitative ascension in its carrying capacity.
After all, although it is in terms of engines, it can withstand greater transportation capacity, but the keel and body of this aircraft are not allowed to carry heavier cargo. ”
“Of course! There are bad, and naturally there is a good side, that is because there is not much work on the internal structure of the aircraft, so the difficulty of the transformation is very small, and the speed of the transformation can also be completed in a short time. According to my calculations, it will definitely be completed within one month at most.
As for the second solution, compared to the first solution, it is much more complicated, that is, to modify the whole machine, such as strengthening the strength of the body and keel of the whole machine, and replacing the original skin. Glass, electronic equipment, etc., make the aircraft itself stronger, and at the same time, it will naturally be stronger in terms of defense. The most important thing is that such a transformation will also have a qualitative Ascension in terms of transportation capacity.
According to the data, the maximum carrying capacity of this transport aircraft was originally about 20 tons, but after a series of modifications, according to my estimation, the maximum carrying capacity of this aircraft will be Ascension to about 45 tons. It can be said, it can be said that in doing so, it is equivalent to saying that the carrying capacity of this transport aircraft is already very close to that of a large transport aircraft.
However, in this case, the required transformation time will not be completed in one and a half. According to my estimation, it will take at least two or three months to complete.
In addition, this transformation will also greatly increase the weight of the Ascension aircraft and the taxi distance of the aircraft during takeoff. At the same time, the hardware requirements of the airport will also further increase the Ascension. Take off and land on the field airstrip. “After a complete inspection of the transport plane, Professor Dai said to Wang Bin.
After listening to Professor Dai’s two transformation plans, Wang Bin thought about it and said to Professor Dai: “Professor Dai, to be honest, it is equivalent to the first transformation plan. In fact, I am more inclined to use the second transformation plan. The plan, after all, is actually the most important maritime transport capability for a transport aircraft.
But it’s a bit longer in terms of renovation time, I don’t think so! We do not need to modify the aircraft as a whole. We can use selective modification. For example, in the airframe and fuselage, we can strengthen it, but we don’t need to carry out all-round modification.
Secondly, we don’t have to make too many changes in the skin. After all, this transport aircraft is already an old type transport aircraft, and there is no need to do so.
And after such a transformation, the carrying capacity of this transport aircraft will also have a large Ascension. According to my estimation, it is absolutely not a problem to change the carrying capacity from 20 tons Ascension to about 35 tons. ”
“Yes, if you carry out the transformation according to the plan you said, the carrying capacity of Ascension can indeed be ten to fifteen tons, and in terms of the transformation time, there is no need for such a long time at all. According to the capabilities of our Tiangong Technology It only takes one to two months to complete.” Professor Dai said after careful consideration.
“That’s OK! Let’s carry out the transformation with this plan! And strive to complete the transformation of this transport aircraft within one month, and conduct a test flight!” Wang Bin nodded and said.
After speaking, Wang Bin thought for a while and said to Professor Piao: “Professor Dai, Professor Piao and Professor Zhang, wait a moment for you to inform the people in your department to come to conference room No. 1 for a meeting.
Now our Tiangong Technology’s R&D and production of engines has been on the right track, and the speed of research and development is also very amazing. At the same time, our Tiangong Technology is not lacking in terms of funds.
I think it’s time for our Tiangong Technology to start to enter the research and development and manufacturing of aircraft.
So I am going to discuss with you, the first real manned aircraft of our Tiangong Technology! “Wang Bin said.
Regarding what Wang Bin said, preparing to start the formal development and manufacturing of aircraft, neither Professor Poke nor Professor Dai or Professor Zhang had any surprised expressions.
Because they are very aware of the current situation of Tiangong Technology, and also know Wang Bin’s goals, but originally they thought that Wang Bin would put forward the idea of developing their own Tiangong Technology aircraft when they developed the first engine, but Unexpectedly, we will wait until now, when the second turbofan engine of Tiangong Technology has been developed, then we will put forward this idea.
So after Wang Bin finished speaking, Professor Poke and others nodded directly.
After that, they returned to their laboratory and notified relevant scientific researchers that they came to the No. 1 conference room of Tiangong Technology.
When Wang Bin came to the No. 1 conference room of Tiangong Technology, at this time, there were only full seats in the huge No. 1 conference room.
After seeing that the personnel were almost there, Wang Bin went directly to the podium and said to the technology personnel present: “Hello everyone, I think I am looking for you this time for the purpose. Everyone has passed your laboratory. The person in charge of, I know, that is that our Tiangong Technology is preparing to enter the research and development and manufacturing of aircraft.
However, I would like to hear your opinions on the research and development of our first aircraft. ”
After listening to Wang Bin’s words, some began to discuss with each other, some lowered their heads thinking, and some even wrote something directly in their own computer.
And Wang Bin was not in a hurry. After speaking, he sat down and waited quietly for the discussion of these researchers until they came over for nearly two hours. At this time, the discussion in the conference room was much quieter. , This is almost what most people have discussed.
So he stood up and asked them: “Well, everyone can talk about their own opinions!”
After Wang Bin finished speaking and sat down, an old man in the meeting room who was about 60 years old stood up and said: “Mr. Wang and everyone, I think that although our Tiangong Technology has a A great achievement, and many types of engines have been developed, but in terms of airplanes, apart from the development of a drone, Tiangong Technology does not have any experience in the development of manned aircraft, so I It is believed that we, Tiangong Technology, are now ready to enter the aircraft design and manufacturing research and development.
To be on the safe side, we should develop and manufacture step by step, so I think we should first start with the research and development of helicopters, and in the research and development of helicopters, we should also start with light helicopters, then to medium helicopters, and then large Helicopters, then heavy helicopters, and finally fixed-wing aircraft.
Of course, we should do the same for fixed-wing aircraft. This is the most entrusted. At the same time, even if the research and development fails at the beginning, it will not cause any loss to our Tiangong Technology. ”